Page 10 - Wash Around
P. 10
WASH AROUND
Specifications
Requirements
Physical
Tunnel space required 196”
Unit height 123”
Unit width 146”
Utility
Electrical Air Panel Solenoids: 110VAC
Electric motors: 3 phase, 2HP (if applicable)
Hydraulic 4 GPM @ 900 PSI
Pneumatic .3 CFM @ 90 PSI minimum 120 PSI maximum
Water (reclaim) (1) 3/4” pipe @ 18 GPM@ 40 PSI
Operation
Physical
Vehicle clearance, height 90”
Vehicle clearance, width 127”
DISCONNECT AND LOCKOUT ELECTRICAL POWER BEFORE SERVICING ANY
EQUIPMENT!
CAUTION
Always wear safety glasses when performing maintenance on any equipment
CAUTION
It is recommended that a licensed electrician is contracted to perform all electrical installations.
CAUTION
YOUR HYDRAULIC SYSTEM MUST BE CAPABLE OF ADJUSTMENT TO 76 RPM AT
900 PSI WHILE LOADED AGAINST VEHICLE. PLEASE VERIFY YOUR SYSTEMS
CAPABILITY TO MEET THESE SETTING WHILE RUNNING A VEHICLE PRIOR TO
INSTALLING PIECE OF EQUIPMENT
CAUTION
A compressed Air System should be set correctly to support 90 PSI necessary to operate
equipment, but should never be set to deliver more than 120 PSI air pressure to the Belanger
specified equipment.
8 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL798
