Page 36 - Wave Across™ Signature® Series
P. 36

WAVE ACROSS™ Signature ® Series


             Maintenance

             Drive Arm / Rack Connector Bushing Replacement

                Replacement Instructions
                4)  Drill a 1/4” diameter hole into the bushing through the existing hole of the Drive Arm / Rack
                    Connector.



















                5)  Drive the pin back into place using a hammer.


















                6)  Make sure the pin is flush with the surface of the Drive Arm / Rack Connector.




























              32      Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681       1MANUL851
   31   32   33   34   35   36   37   38