Page 12 - Undercarriage Wash / Rust Inhibitor
P. 12

UNDERCARRIAGE WASH AND RUST INHIBITOR


             Installation


             Tunnel Placement

              ƒ  Actual placement or tunnel depth may vary according to preference, tunnel space available or
                 system configuration Assembly


             Assembly
               1)  Position the Undercarriage Wash/Rust Inhibitor in the desired location. This is traditionally just before the
                  entrance leg to the first piece of equipment in the tunnel.
               2)  Position it so that the right side of the Undercarriage Wash/Rust Inhibitor is angled towards the tunnel
                  entrance.
               3)  Once it is in its permanent location, lag it to the floor.
               4)  Plumb water feed from Undercarriage Wash valve assembly.

             Maintenance



             Daily
              ƒ  Inspect nozzle spray pattern(s). If clogged clean nozzle, or replace if necessary.


             Replacement Parts

                           Part Number                         Description
                       1NOZZL-FJ348           40 degree-1.0, plastic fan jet nozzle

                       1NOZZL-FJ406           40 degree-1.5, plastic fan jet nozzle
                       1GASKT600              Gasket for UC/RI-45




































             10           Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681            1MANUL785
   7   8   9   10   11   12   13   14