Page 158 - schluter 2019 Price List DJC final(1)_Neat

Material Properties and Areas of Application
Schluter ® profiles are resistant to most exposed to air will oxidize, resulting in a natural Color-coated aluminum and textured
chemicals encountered in tiled environments. patina. If exposed to moisture or aggressive color-coated aluminum are pretreated
In special cases, the suitability of a proposed substances, heavy oxidation and spotting may (chromated) aluminum that is color-coated
type of material must be verified based on the occur. with a polyurethane powder coat. The coating
anticipated chemical, mechanical, and/or is color-stable, UV-resistant, and suitable for
other stresses. Exceptions and special Chrome-plated brass is especially suited exterior use. Protect the profile against abrasion
considerations are listed below. for wall corners and finishing applications. or scratching.
It is ideal for matching chrome fixtures. Surface
Stainless steel profiles are roll-formed, resulting areas must be protected against abrasion or PVC profiles are made of pre-colored, rigid PVC
in a slightly different contour from those made scratching. that resists bending or scratching. The material
of extruded brass or aluminum. Stainless is UV-resistant, though not permanently color-
steel can sustain high mechanical stresses Aluminum profiles must be tested to verify their stable, in exterior applications. PVC profiles are
and is particularly well suited for applications suitability if chemical stresses are anticipated. not suited for corners or transitions subjected to
requiring resistance against chemicals and Cementitious materials, in conjunction with heavy mechanical stresses (e.g., at step edges
acids; for example in the food industry, moisture, become alkaline. Since aluminum or floor transitions).
breweries, dairies, commercial kitchens, and is sensitive to alkaline substances, exposure
hospitals, as well as in residential applications. to the alkali (depending on the concentration
Typically, the profiles are formed using and duration of exposure) may result in
stainless steel 304 (1.4301 = V2A). For more corrosion (aluminum hydroxide formation).
severe chemical exposure, such as de-icing Therefore, it is important to remove mortar
salts and chemicals used in swimming pools, or grout residue from visible surfaces.
we recommend the use of stainless steel 316 In addition, ensure that the profile is solidly
L (1.4404 = V4A), which offers even higher embedded in the setting material and that all
corrosion resistance than the 304. Even cavities are filled to prevent the collection of
stainless steel cannot withstand all chemical alkaline water.
exposures, such as hydrochloric acid,
hydrofluoric acid or certain chlorine, chloride Anodized aluminum profiles feature an
and brine concentrations. anodized layer that retains a uniform appearance
during normal use. The surface, however, is
Solid brass sustains high levels of mechanical susceptible to scratching and wear and may be
stress; for example, as edge protection for damaged by grout or setting material. Therefore,
outside wall corners or edges of surface these materials must be removed immediately.
coverings. Brass is resistant to most chemicals Otherwise, the description regarding aluminum
used in tiled environments. Solid brass that is applies.

156 Customer Service: 800-472-4588