Page 134 - 2021-22 Auto Performance_Circle Track

Coil-Over Load Bolt Assembly
ALL56074
Threaded aluminum bolt is 6" long with

as an adjustable travel limiter. Also used with ALL56098 threaded sleeve.
Part No. Description
ALL56075 Shock End
Suspension Limiter
Single-bushing suspension limiter is common-
ly used on the chassis LR or RR to limit travel
during acceleration “hike up” and control roll
steer. Dual-bushing limiter is often used on the
lift bar to control lift bar travel on deceleration. Bushing design reduces or absorbs shock
when suspension is limited and helps reduce
tire unloading. Top plate is drilled to attach a 1/2" rod end when used in a shock mount or for attaching to a weight jack bolt with 7/16"-20 internal threads using optional chrome moly stud ALL64304. Clevis has a 3/8" hole for simple attachment to a chain or cable.
Weld-On Trailing Arm Brackets
Weld lower rear mount brackets to 3" axle tube to mount coil- overs and trailing arms. Brackets are 1/4" thick steel with 1/2" shock hole. Available with either 3/4" trailing arm holes or a 2" long slot.
SUSPENSION
Part No.
ALL64302
Limiter Chain Kit
Description
Dual Bushing Limiter
ALL60126
Bracket with two trailing arm holes.
ALL60128
Bracket with 2" slot.
Weld-On Trailing Arm/ Shock Brackets
Flame-cut 1/2" thick steel brackets weld to 3" diameter axle tube, providing mounting points for trailing arm and shock. Brackets have two 3/4"-10 threaded holes to mount trailing arm and a 1/2" diameter hole with spacer for mounting a shock.
ALL64300
Single Bushing Limiter
ALL64304
Chrome Moly Stud with Jam Nut
Commonly used to limit rear suspen- sion or lift bar travel. Chain can be eas- ily cut to required length. Shrink sleeve installs over chain, and when heated with a heat gun, shrinks to keep chain in position and prevent chain from binding or catching on itself.
Part No.
ALL60110 ALL60111
Description
LH Bracket RH Bracket
Part No.
ALL64312 ALL64314
Description
3/16" Diameter Accepts 3/8" Pin or Bolt 5/16" Diameter Accepts 1/2" Pin or Bolt
ALL60110
QC Axle Tube Support Brackets
Clamp-On Trailing Arm Brackets
Steel brackets clamp on 3" axle tube for attachment of coil-over shocks and trailing arms. Available with two 3/4" holes or a 2" slot. Grade 5 hard- ware and Nyloc nuts included.
Brackets provide mounting points for a strut rod assembly to help change rear ends. ALL68320 attaches to the side bell bolts
on most quick-change rear
ends. ALL68322 has tabs with 1/2" holes and mounts directly onto a 3" axle tube.
ALL68320
ALL68322
Part No.
ALL68320 ALL68322
Description
Center Section Mount Axle Tube Mount
Part No.
ALL60134 ALL60135
Description
Bracket with Two 3/4" Holes Bracket with 2" Slot
RICH SEGVICH
Clamp-On Trailing Arm Bracket ALL60136 Universal bracket
mounts coil-over elimi-
nator and shock next to
axle and mounts trailing
arm 4-1/2" below axle
centerline, either inside or
outside of bracket. Allows
Limited Late Models and

from coil-over to coil-over elimi- nator and shock. Grade 5 hardware and Nyloc nuts included.
132 TRACK
CIRCLE 2021-22
ALL68320 ALL68322