Page 614 - 2021-22 Auto Performance_Circle Track
P. 614
Adjustable Vacuum Regulator
PTR08-0455
in maintaining optimal crankcase vacuum, which
SB Chevy Manifold End Rail Spacers
In-Line Temp Port Assembly
has a standard 5/8"-18 threaded port for a temperature probe.
Part No.
PTR09-1940 PTR09-1960
Fill the gap between the manifold and the lifter valley end rails when using raised port cylinder heads on small block Chevy engines. Sold in pairs, Spacers include four 3/16" roll pins for retention. Drilling of the block is required for installation.
Part No.
PTR09-1060 PTR09-1061 PTR09-1062 PTR09-1063
Swivel Water Necks
ment. Viton Seals are used internally and
Must use a spacer with thermostat.
Part No.
PTR10-2116
PTR10-2120
Rebuild Kits
PTR10-2221
Water Neck Riser Block
Inline Ball Valve PTR09-0920 Inline ball shut-off valve is manufactured
from premium billet aluminum and is
ball and PTFE seals. Valve includes
GM LS7 Oil Pan Adapter
PTR15-5001
Special adapter allows converting
-
termarket tank. Billet aluminum adapter in-
Peterson’s riser blocks are available with
tion of the water to the cylinder heads via
temperature sender port is also available. An
Part No.
PTR10-2250 PTR10-2251 PTR10-2252 PTR10-2256
Description
1" Thick Plain Riser, Accepts Thermostat
1" Thick Riser, Two -6AN Ports
1" Thick Riser, Two -6AN Ports with Water Temp. Sender Port 1-1/4" Thick Riser, Two -8AN Ports
Fuel Pressure Regulator Fittings
have large bores and are radiused on the inlet
Y-Manifolds
PTR10-0070
Part No.
PTR15-1002 PTR15-1004
Oil Inlet Fittings
Description
Fuel Regulator -10AN x -8 Port Fuel Regulator -8AN x -8 Port
When multiple oil lines need to be combined into a single high-
Part No.
PTR10-0070 PTR10-1712 PTR10-1721 PTR10-1725
Description
Billet Aluminum Y-Manifold, -10 x -8AN x -8AN x -8AN x -8AN Aluminum Tube Y-Manifold, -12 Female, -12 Male, -12 Male Aluminum Tube Y-Manifold, -12, -12, -12 Aluminum Tube Y-Manifold, -16, -12, -12
Part No.
Description
Description
Spacer Set, .125" Spacer Set, .187" Spacer Set, .250" Spacer Set, .375"
Thick Thick Thick Thick
612 TRACK
CIRCLE 2021-22
Description
PTFE Engine Seals
for engines with dry sump oil sys- tems. Seals are manufactured by TKO Competition Development.
-16AN Water Neck -20AN Water Neck
Rebuild Kit for -20AN Water Neck
Part No.
PTRSM85338 PTRSM85742 PTRSM86410 PTRSM86586 PTRSM86587 PTRSM86625 PTRSM86990
Description
Front Crank Seal, SB Ford 302-351W
Rear Main Seal, SB Ford 351W with 302 Crankshaft Rear Main Seal, SB Chevy 400
Jesel Front Cover, Chevy Cam Seal
Jesel Front Cover, SB Chevy Crank Seal
Rear Main Seal, SB Chevy 350
Front Crank Seal, SB Chevy
PTR10-1725
Fitting installation allows oil input at the front of the block over the water pump on small block Chevys. Man- aluminum.
-10AN Ports, 3.250" Long x .850" Width x 1.000" Hex Flats
PTR15-1080
PTR15-1082 -10AN Ports, 3.250" Long x .850" Width x 1.062" Hex Flats NEW!
Description
-10AN Nose x -10AN Nose -12AN Nose x -12AN Nose
