Page 313 - 2021-22 Auto Performance_Hot Rod and Early Muscle
P. 313
High-Performance
Electric Cooling Fans Mr. Gasket fans provide more
where it is needed most. Fans also
free up more usable horsepower
to the rear wheels, and increase
fuel economy. The motor rides on dual ball bearings, not on bushings like some others. Reversible fan blades are
MRG1987 14" 1800 2100 10.3
Electric Fan Depth (D) Height (H) Width (W)
Overall Fan Assembly Dimensions
Aluminum Carb Spacer Kits
bolt pattern. The one-inch open- center spacer MRG6005 has a 1/4" knockout hole if an additional vacuum port is required.
Part No.
MRG6005 MRG6006 MRG6007
Description
1" Open Center 1" 4-Hole Center 2" Open Center
MRG6005
Part No.
Size
CFM
RPM
AMP Draw
14" 3.40" 14.69" 16" 3.40" 16.56"
Replacement Fan Mounting Kit
MRG1994
14.00" 16.00"
Clear View Fuel Bowl Sight Plugs MRG6057
-
without removing the plugs. Much faster, levels. Two pack.
Throttle Cable Bracket Kit MRG6039
Chrome-plated throttle cable
bracket will make carburetor swaps
to any engine compartment. Kit includes
a secondary bracket for automatic transmission kickdown cable.
Universal Dual Throttle
Return Spring Kit MRG19
The same mounting kit included with all Mr. Gasket
Thermocap Temperature
Reading Thermostat
MRG2470S
This cap can be the difference between safely opening a radiator cap and serious injury from steam burns. Domestic Radiators, 13 PSI
High-Performance Thermostats High-performance thermostats resist large variations
in coolant pressures. At high RPM, coolant temperature - stat, often keeping it from opening at the designated temperature. Thermostats listed are for 1995 and earlier models only.
The dual throttle return spring and bracket kit is engi- neered for positive throttle return to
assure safety.
Chrome Plated Fuel Lines With
Fuel Pressure Gauge
The fuel lines incorporate a com-
pact, convenient 1-1/2" fuel pres- sure gauge that reads out in 1/2 pound increments with a range inlet thread size is 5/8"-18.
Part No.
GM/Ford/AMC
MRG4363 MRG4364 MRG4365
Description
160°F 180°F 195°F
Part No.
MRG1558
MRG1559
Description
Fits Holley With 8-21/32" Centers
Fits Holley With 9-5/16" Centers
Chrysler/Dodge/Plymouth
MRG4366 160°F MRG4367 180°F
Carburetor Adapter Kits Adapters are made of die-cast alu-
minum and include gaskets, studs, nuts, and washers. Installation is quick and easy.
Fuel Pressure Gauge
MRG1561
anywhere. Reads out in 1/2 pound incre- ments with a range of 0-15 PSI. Gauge has
Chrome Gas Line Kits Kits include copper tubing,
connections, all chrome-plated.
Part No.
MRG1929
MRG1932
Description
Adapts Holley 350/500 2bbl. Carburetor
To Quadrajet Bolt Pattern, 1-1/8" Tall
Any 4bbl. Carb. To Any 4bbl. Manifold Except Holley 4500 And OEM Manifolds With Exposed Exhaust Crossover Tube, 3/4" Tall
Note: For a positive seal use PTFE tape.
MRG1933
Fits Any 4-Bolt, 4bbl. To Any Small 4-Bolt, 2bbl. Manifold And/Or 4-Bolt, 2bbl. To Any 4-Bolt, 4BBL. Manifold (Except Spread Bore Application), 1" Tall
Part No.
MRG1551 MRG1552
Description
Dual-Inlet Holley, 3/8" Tube, 8-21/32" Centers Dual-Inlet Holley, 3/8" Tube, 9-5/16" Centers
2021 HOT ROD AND EARLY MUSCLE
311
