Page 314 - 2021-22 Auto Performance_Hot Rod and Early Muscle
P. 314
Fuel Pressure Gauge With
In-Line Adapter
MRG1560
Ideal for in-line hook-up of fuel
pressure almost anywhere, gauge
has a 3/8" inlet and outlet. Unit
includes in-line adapter and 1-1/2" gauge that reads out in 1/2 pound increments with a range of 0-15 PSI.
Competition Wire Loom Kit
MRG6015
The looms are compatible with tall valve covers and will accommodate 7mm and 8mm ignition wires. Kit includes two 3-hole dividers, four 2-hole dividers, and four chrome brackets.
Wire Markers
MRG4472
with Mr. Gasket's wire markers.
They are oil- and grease-resistant
Advance Curve Kits The kits allow full advance
between 2,000 and 2,800 RPM. Get maximum power and en- gine acceleration.
Fuel Pressure Regulator
MRG9710
Dial-type regulator adjusts from 1 to 6
Not for fuel-injected systems.
Clearview Fuel Filter Kits
Part No.
Description
MRG9706
Universal,
Fits 1/4", 5/16" And 3/8" ID Hose, Does Not Include Hose Or Clamps
MRG9747
Fits 5/16" ID Hose, Includes 4 Chrome Plated Clamps And 2 Short Lengths Of Hose
MRG9706
Part No.
MRG925B
MRG925D
Description
Mopar Kit With 1 Set Of Springs Only, 1959 And Later, 6 And 8 Cylinders
Ford Kit With 1 Set Of Springs Only, 1965 And Up, Most Applications
Chrome Fuel Filter
MRG9746
on each end have safety beads for positive fuel line retention. Not for fuel injection systems.
Chevy Chrome-Plated Distributor Clamp
MRG6197
Rolled edges add extra strength to
clamp which is ideal for use on mag-
netos as well as point-type or electronic distributors. For
Ford Chrome-Plated
Distributor Clamp
MRG2502
Add a touch of sparkle and hold the distributor timing
Ford 260-351W.
Trunk-Mounted Battery
Installation Kit
MRG6279
Kit includes a plastic
battery case molded from
polyethylene, battery hold-
down and brackets, 20 feet
of 4-gauge stranded copper
battery cable, 4 lugs, a pair
of cable ends, and related
hardware. Case measures 12" x 6-3/4" x 10" high.
Coil Covers And
MRG9767
coil covers accept most stock coils and include chrome-plated mounting brackets.
Mount Bracket Universal chrome-plated steel
Part No.
MRG9767
MRG9777
Custom Wire Loom Kit
MRG6016
Description
Universal GM Style Vertical Mount With Bolt And Nut
Universal Coil Cover Horizontal Mount
The kit will accom- modate 7mm and 8mm ignition wire and in- cludes two 4-hole wire separators, eight 2-hole wire dividers, and four chrome-plated steel brackets.
312 2021 HOT ROD AND EARLY MUSCLE
