Page 432 - 2021-22 Auto Performance_Hot Rod and Early Muscle
P. 432
Flat coil-over spring mounting/
spacer plates maximize ride height
options and provide added coil
stability on SPC Performance tubular
control arms. Fine-tune vehicle
height by stacking spacer plates,
using one spacer per side for 1⁄2” of
added ride height, or two spacers
per side for a 1” gain. Available in packages of (2) or (4) spacers. Include mounting hardware.
These upper control arms
provide a full +/-3° of camber
and caster adjustment to maxi-
mize handling performance, making
them perfect for hot rod and custom
chassis builders. Sold individually, each
control arm includes a stock-style ball joint and installation hardware.
NEW vendor!
Part No.
SPP94348 SPP94346
SPP95338 SPP95332
Description
A-Body & 1rst Gen. F-Bodies
2nd Gen F-Bodies & G-Bodies
Applications
2 Spacers 4 Spacers
2 Spacers 4 Spacers
Part No. Make
Year/Model
1964.5-66 Mustang, 1964-65 Falcon, 1964-65 Ranchero
1964-65 Comet, 1964-65 Cyclone
SPP94220
Ford
Mercury
Pre-set with 3° of caster
to assist with return to
center, these adjust-
able upper control arms
improve handling, and
incorporate a billet alu-
minum cross-shaft with
“Shelby Drop” geometry
that optimizes camber curve. Maintenance-free xAxisTM Provides camber adjustment of +0.75° to -2.0°, and caster adjustment of +1.0° to +5.0° (when combined with factory adjustments). Sold individually, each control arm includes stock-type ball joint and installation hardware.
These upper control
arms provide a full
+/-3° of camber and
caster adjustment to
maximize handling
performance, making
them perfect for hot
rod and custom chassis builders.
Sold individually, each control arm includes a stock-style ball joint and installation hardware.
Part No.
SPP94000 Ford
SPP94800 Ford
Make Year/Model
1974-78 Mustang II
Part No.
SPP94210
Make Year/Model
Mercury 1966-77 Comet, 1967-73 Cougar, 1966-71 Cyclone
SPP72060
CNC-machined from heat-treated 6061 aluminum, these adjustable strut mounts include polyurethane bushings for quiet operation and maximum performance. TIG-welded strut hats allow for increased strut travel, especially helpful on lowered cars. Strut mounts permit camber adjustment of -0.50° to 1.50° and caster adjust- ment from 0° to +1.50°. Sold in pairs, including special strut boots and bump stops.
Ford
1967-73 Mustang, 1966-69 Fairlane, 1966-69 Falcon, 1970-77 Maveric, 1966-71 Ranchero, 1966-71 Torino
Give the han-
dling of 1964-1/2
to 1966 Mus-
tangs a modern
upgrade with an
adjustable upper
control arm and
adjustable strut rod.
Upper control arm has 3°
of caster built in to improve return
to center. OE-style bushings protect the chassis mount and allow for easy caster adjustment. Camber can be adjusted between +0.75° and -2.0°, and caster can be set between +1.0° and +5.0° (when combined with factory adjustments). Includes stock-style ball joint, installation hardware, and two camber adjustment shims for addi-
Part No.
SPP94215
Make
Ford
Year/Model
1964.5-66 Mustang, 1964-65 Falcon, 1964-65 Ranchero
1964-65 Comet, 1964-65 Cyclone
Mercury
430
2021 HOT ROD AND EARLY MUSCLE
