Page 10 - Microsoft Word - Master Series Owner's Manual.docx
P. 10

 3. Soak clean lint free cloth in acetone or similar.
Fitting the Transducers to the Structure
  1. Mark around the transducer with a marker pen.
2. Clean substrate to bare, flat, smooth and paint free
4. Thoroughly clean substrate until surgically clean
6. Make a serpentine trail of adhesive across the transducer head and smear to smooth even coating with a spatula
8. Press firmly on transducer for 20-30 seconds to set bond.
    5. Repeat cleaning process on transducer head.
  7. Immediately set transducer into location

   8   9   10   11   12