Page 354 - 2018 National Home Improvement

2018 National Home Improvement Estimator, All Rights Reserved Page 285

Adhesive remover. Removes latex, acrylic and pressure-sensitive adhesives from concrete, wood,
sheet vinyl, tile, ceramic and terrazzo substrates. Highly concentrated cleaning solution.
Quart --@.000 Ea 15.86 -- 15.86

Sentinel 747 flooring adhesive remover. For cleaning cutback, emulsion and outdoor flooring
mastics. Coverage is 75 to 150 square feet per gallon.
Gallon --@.000 Ea 56.16 -- 56.16

Henry 550 embossing leveler. Levels embossed areas in existing resilient flooring prior to installing
new resilient flooring. One-part latex polymer resin. No mixing required. Can be used directly over
urethane wear surfaces with no special preparation. Eliminates the need to remove the old floor.
Prevents pattern show-through. Coverage: approximately 54 square feet per quart over heavy embossed
floors or 108 square feet per quart over lightly embossed floors. Working time 15 to 20 minutes.
Quart --@.000 Ea 29.29 -- 29.29

Liquid underlayment. For residential use as an embossing leveler. Can be used directly over
CleanSweep surfaces with no special preparation. Eliminates the need to remove a damaged floor.
Prevents pattern show-through. Coverage is approximately 216 square feet per gallon over heavily
embossed floors or 432 square feet per gallon over lightly embossed floors. Working time is 15 to 20
minutes.
Gallon --@.000 Ea 85.85 -- 85.85

Latex primer and additive, S-185, Armstrong. For priming wood and concrete before installing
resilient floors. Improves adhesion. Fast-drying, ready for adhesive in 60 minutes. Gallon covers 400
square feet.
Quart --@.000 Ea 9.60 -- 9.60
Gallon --@.000 Ea 17.17 -- 17.17

Henry 336 floor primer. Improves adhesion on dry, dusty and porous substrates. Bonds to concrete,
poured-in-place gypsum subfloors, wood and wood underlayments, radiant-heated subfloors where the
surface temperature does not exceed 85 degrees F (29 degrees C), wall surfaces such as wood,
plaster, drywall, and masonry.
Quart --@.000 Ea 6.65 -- 6.65
Gallon --@.000 Ea 12.73 -- 12.73

Fast-setting patch and underlayment, S-184, Armstrong. Cement-based smooth finish under
resilient flooring. Ready for adhesive in 60 minutes. Can be used to skim coat over old cutback
adhesive.
3 pounds --@.000 Ea 7.86 -- 7.86
10 pounds --@.000 Ea 16.36 -- 16.36
25 pounds --@.000 Ea 19.09 -- 19.09

Cement-based underlayment, Armstrong. Fast-setting cement-based patch and underlayment for
use over wood and concrete in resilient flooring application. Ready for most flooring in 1-2 hours.
10-pound bag covers 10 square feet at 1/8" thickness.
10 pounds --@.000 Ea 12.63 -- 12.63
40 pounds --@.000 Ea 24.24 -- 24.24

Henry 331 patch. Ready-to-use gypsum-based patch – just add water. Fills voids and levels floors from
particle thin to 1" thick in a single application. Non-shrinking. Fast-setting.
25 pounds --@.000 Ea 8.24 -- 8.24