Page 384 - 2018 National Home Improvement
P. 384
2018 National Home Improvement Estimator, All Rights Reserved Page 307
Underwater tile repair mortar, Custom® Building Products. Replace broken tile underwater without
draining fountains, pools or spas. Mix with water for immediate use.
1.5 pound --@.000 Ea 7.39 -- 7.39
Acrylic mortar admix, Custom® Building Products. Greatly increases bond strength,
water-resistance and impact resistance of non-polymer modified thin-sets, mortars and grouts. Use with
PremiumPlus®, MasterBlend™ and CustomBlend® thin-sets, Portland cement mortar mixes and
non-polymer modified grouts. Recommended to use with non-polymer modified thin-set mortars when
setting vitreous, dense tile or setting over hard-to-bond-to surfaces such as laminates, existing ceramic
tile and plywood.
3 quarts --@.000 Ea 11.01 -- 11.01
2-1/2 gallons --@.000 Ea 23.33 -- 23.33
AFM® anti-fracture membrane kit, ProtectoWrap. Peel-and-stick 40 mm membrane. For indoor use
under thin-set tile, stone and marble for crack suppression. Includes primer, knife, and instruction sheet.
12" x 25' roll, per square foot --@.000 SF 1.67 -- 1.67
5' wide roll, per square foot --@.000 SF 1.40 -- 1.40
Ceramic tile adhesive caulk, Tile Perfect. For tile, tubs, showers, and countertops. Mold and mildew
resistant. Remains flexible and paintable.
5.5 ounce tube --@.000 Ea 4.46 -- 4.46
White dry tile grout (non-sanded), Custom® Building Products. Portland-cement-based grout for
interior/exterior floor and wall tiles with narrow joints up to 1/8" (3 mm). For soft-glazed, high-glazed and
marble tile subject to scratching by sanded grouts.
1 pound --@.000 Ea 2.09 -- 2.09
5 pounds --@.000 Ea 5.80 -- 5.80
10 pounds --@.000 Ea 7.24 -- 7.24
25 pounds --@.000 Ea 10.02 -- 10.02
Grout colorant, Custom® Building Products. Renews or changes grout color, interior or exterior.
Seals grout joints and evens color. Water-based and fade-resistant. Available in 10 popular Polyblend®
grout colors.
1/2 pint, most colors --@.000 Ea 13.23 -- 13.23
Saltillo grout mix, Custom® Building Products. Pre-blended mix of Portland cement, silica sand
and pigments. For any interior or exterior tile with wide grout joints, 1/2" to 1-1/4". Recommend mixing
with acrylic mortar admix diluted 1:1 with water for higher strength.
Gray, tan or red, 50 pounds --@.000 Ea 13.74 -- 13.74
Sanded tile grout, Weco. Provides a smooth, colorfast joint for wall and floor installations.
Most colors, 25 pounds --@.000 Ea 10.61 -- 10.61
Polyblend® ceramic tile caulk, Custom® Building Products. Fills and repairs joints around sinks,
tubs, showers and countertops. Siliconate acrylic formula.
Sanded, various colors, 5.5 ounces --@.000 Ea 4.06 -- 4.06
High-gloss finish/sealer, Miracle Sealants Co. Medium- to high-gloss interior surface sealer for
Saltillo tile, terra cotta tile, unglazed ceramic tile, brick, slate and concrete. One gallon covers 500 to
1000 square feet.
Quart --@.000 Ea 11.01 -- 11.01
Gallon --@.000 Ea 27.57 -- 27.57
Sealer’s Choice 15 Gold, Aqua Mix. Water-based sealer leaves a no-sheen natural look. Maximum
stain protection in food preparation areas, on porous tile and natural stone. One gallon covers 300 to
1500 square feet.