Page 370 - C.C.Marine Parts & Accessories Catalogue

DIGITAL METERS/TEMPERATURE SENSORS
M2 OLED DIGITAL METERS
The M2 Organic LED Digital Monitor measures essential electrical system parameters with adjustable alarms and an auto-dimming display. The M2 Monitors include a MOSFET External Circuit Relay (ECR) which can be used to control external circuits based on any value measured by the M2. • Auto-dimming, bright Organic LED display is easy to read
• 80dB alarm on all models • Isolated 500mA MOSFET relay • Includes external DC Shunt or AC Current Transformer when required
1839 Tank Level Meter Features
• Intuitive tank level monitoring • Monitor up to 4 tanks • Auto calibration for unique tank shapes • Compatible with common sending units 1841 External Temperature Meter Features • Versatile external temperature monitoring • Monitor up to 4 temperature sensors • Temperatures range from -40°C to 125°C (-40°F to 250°F) • Measures in Fahrenheit or Celsius • ABYC compliant for engine exhaust • Waterproof temperature sensors included (4x 1821 included) 1842 Bilge Meter Features • Monitor up to 4 bilges • Alarm/Relay Activation: Run Time/hr cycles/24 hr Average Cycles • Senders: Float switch or pumps with bilge active outputs
Not compatible with “fully auomatic bilge pumps” • Cycle counter
SUBMERSIBLE TEMPERATURE SENSOR • General temperature sensor designed to
work for most applications • Easy double sided tape installation • Fully submersible (IP68 rated) • Wires connect in either order • Works with all Blue Sea Systems devices that require a
ORDER NO.
738-18390
ORDER NO.
738-18410
ORDER NO.
738-18420
Mfr. No.
1839
Mfr. No.
1841
Mfr. No.
Description
Tank Level Meter
Description
External Temp Meter
Description
1842 (Bilge float switch not included)
SPECIFICATIONS
Display Size 55mm x 28mm Power Supply Voltage 7–70V DC* Range (Power Consumption) 0.3W–1.0W * Variable with voltage, display intensity, and sleep mode Regulatory: IP66 - Protected against powerful water jets
Bilge Meter
HIGH TEMPERATURE SENSOR
• Designed for sensing raw water exhaust without drilling holes. Strap sensor to the outside of the pipe for accurate readings of raw water exhaust temperature/
• Multiple mounting options • Non-submersible IP65 – protected against jets of water • Wires connect in either order • Works with all Blue Sea Systems devices that require a
temperature sensor • Temperature Range: • Resistance: • Wire Length: • Wire Size:
-40˚F to 175˚F (-40˚C to 80˚C) 10,000 Ohms@25˚C 12" 16 AWG
temperature sensor • Temperature Range: • Wire Length: • Wire Size:
-40˚F to 300˚F (-40˚C to 150˚C) 18" 16 AWG
ORDER NO.
738-18200
Mfr. No.
1820
ORDER NO.
738-18210
Mfr. No.
1821
For more information see: www.bluesea.com
336