Page 371 - C.C.Marine Parts & Accessories Catalogue

DIGTAL MONITOR/MINI METERS
M2 VESSEL SYSTEMS MONITOR (M2 VSM)
Performs comprehensive monitoring of four critical systems in one compact organic LED digital monitor. DC System Monitoring (up to two batteries) One input monitors the DC voltage, state-of-charge, current for one battery bank and another input monitors the voltage of an additional battery bank.
Alarms include high and low voltage, high current, and low battery.
AC System Monitoring
The VSM monitors a single AC voltage, current, and frequency. Alarms include high and low voltage, high current, and high and low frequency. Bilge and Tank Monitoring The M2 VSM has two inputs that can be configured as a bilge or tank monitor. When configured as a bilge input, monitoring functions include pump active, cycle count in the last 24-hours, average cycles in a typical 24- hour period, and total cycles. High alarms can be set for both the minutes of run time in the last hour as well as the number of cycle counts in the last 24-hours. When configured as a tank input, tank status can be represented in both capacity (gallons or liters) or as a percentage of capacity. Custom tank shapes can be auto-calibrated or programmed. Both high and low level alarms can be set for all tanks.
DC Specifications
Nominal Voltage Operating Voltage Min. Current Draw
Voltage Accuracy Current Range Current Accurancy.
-
12V, 24V, 48V 7-70V 18.8mA @ 12V, display off 35mA @ 24V, display off +/- 1% -500A to 500A +/- 1%
120V @ 60Hz 40-300V +/- 1% 0-150A
+/- 2% 40-90Hz
AC Specifications - Nominal Voltage Operating Voltage Voltage Accuracy (RMS) Current Range
Current Accuracy (RMS) Frequency
1850
ORDER NO. 738-18500 738-18100 738-18110
1810
Mfr. No. 1850-BSS 1810-BSS 1811-BSS
Description M2 VSM 32" Diesel, Water, Waste Tank sender for use with VSM 422 & M2 VSM 24" Gasoline Tank Sender for use with the VSM 422 & M2 VSM
MINI OLED METERS
Monitors essential electrical system parameters on a bright, waterproof, daylight readable OLED screen
• Compact size enables mounting in any convenient location • Reverse polarity protected • Mounts in a common 1-1/8 in hole 1733 Features
• Convenient voltage monitoring • Monitors 8V to 36V DC 1732 Features • Convenient amperage monitoring • Monitors - 100A to 100A DC
• Positive or negative side wiring
1741 Features
• Convenient temperature monitoring • Temperature range from -40˚C to 125˚C (-40˚F to 250˚F) • Measures in Fahrenheit or Celsius SPECIFICATIONS Cutout Dimensions in (mm) 1-1/8" (29mm) diameter Regulatory: IP66 - Protected against powerful water jets
ORDER NO.
Mfr. No. Description
Nominal Voltage Input Voltage Max. Operating Current Resolution Voltage Accuracy Intermittent: 5 min. Cranking: 30 sec. DC Shunt (Included)
Temp Sensor (Included) Monitors
738-17330
738-17330
1733 Voltmeter
12V / 24V DC 8V - 36V DC 15mA 0.01V DC
+/- 1% - - -
- 8V-36V DC
738-17320
738-17320
1732 Ammeter
12V / 24V DC 8V - 36V DC 15mA 0.1A
+/- 2% 110A 175A 9230 (100A/50mV) - -100A-100A DC
738-17410
738-17410
1741 Temp Meter
12V/24VDC 8V-36VDC 10mA 1˚F or 1˚C
+/- 1.25% - -
1821 -40˚F - 257˚F or -40˚C - 125˚C
Ø1.575" (40.00mm)
.133" (3.39mm)
.428" (10.86mm)
2.109" (53.56mm)
1.296" (32.91mm) Maximum Mounting Thickness
Side View
M2 OLED Surface Mount
1833 DC VOLTMETER
.895" (22.74mm)
.250" (.009mm) Quick Connect Input Terminals
Front/Display View
For more information see: www.bluesea.com
1811
Regulatory - Monitor face is IP66 - protected against powerful water jet when installed according to instructions. NMEA 2000 Certified & uses standard connectors.
337