Page 74 - C.C.Marine Parts & Accessories Catalogue

SEASTAR HYDRAULIC STEERING - OIL, HARDWARE KITS
SEASTAR HYDRAULIC OIL
FILLER KIT
For SeaStar & Syten Helms
Filler Kit with Screw-On Cap to fit Oil Bottle ORDER NO. 033-54380
Due to recent upgrades in our steering system components, Dometic recommends the use of SeaStar Steering Fluid ONLY in our hydraulic steering systems. SeaStar Steering Systems have been engineered and validated using
our proprietary SeaStar Hydraulic Steering Fluid. SeaStar Steering fluid is engineered with special additive package that contains anti-foaming and anti- rusting agents, anti-oxidants, viscosity stabilizers, corrosion inhibitors, wear additives as well as water emulsification additives. It is highly recommend that SeaStar Steering Fluid be used to ensure optimum system performance and safety.
ANY NON-APPROVED FLUID MAY CAUSE SERIOUS DAMAGE TO THE STEERING SYSTEM RESULTING IN POSSIBLE LOSS OF STEERING, CAUSING PROPERTY DAMAGE, PERSONAL INJURY AND/OR DEATH
1 Litre Bottle. 4 Litre Bottle. 18.9 L Pail.
ORDER NO. 033-54300 ORDER NO. 033-54400 ORDER NO. 033-54580
HYDRAULIC STEERING HARDWARE KITS
HP6013 / ORD. # 037-60130 SS Rod End Ball Joint 5/8" hole, 5/8" x 18UNF thread
HP6019 / ORD. # 037-60190 SS Rod end ball joint 3/4" hole, 3/4" x 16 UNF thread
For more information see: www.seastarsolutions.com
FILLER PLUGS
VENT PLUG
•For use with SeaStar helms • Must be used on helm pump on single
steering station systems • Must be used on upper-most helm pump only
on multi-steering station systems •Colour: Black Cap-Silver Threads
ORDER NO. Mfr. No. Description
033-61260 HP 6126 Vented 5Pk. NON-VENT PLUG
• Must be used on all helm pumps other than upper-most helm pump on multi-steering station systems.
•This non-vent plug is supplied with additional station fitting kit no. 037-55010 and 037-55020.
•Colour: Black Cap-Silver Threads
ORDER NO. Mfr. No. Description
033-54320 HA 5432 Non-Vented
HP6032 / ORD. # 037-60320 Service Kit for SeaStar Helms, except commercial Helms
HP6033 / ORD. # 037-60330 Mounting hardware for O/B pivot plate cylinder
HP6036 / ORD. # 037-60360 Spacer kit for O/B front mount cylinder
HP6037 / ORD. # 037-60370 Service kit for SeaStar commercial helms
HP6052 / ORD. # 037-60520 Bezel, for tilt helms Traditional Tilts Only
CYLINDER SERVICE KIT
Designed to make servicing the hydraulic cylinder easier. Complete kit includes bleeder wrench, end gland wrench pin. Fits 4-hole & 8-hole end gland. Compact design.
HS5300 / ORD. # 034-53000
For more information see: www.dometic.com
40