Page 24 - Blog Posts v1

No. 4 – Protocols for hair removal
Here, Marlon describes his typical protocols for hair removal with his IPL unit.
https://youtu.be/7BPHDKModHk
No. 5 – Complications
In this clip, he discusses possible complications following treatments.
https://youtu.be/LwE1lIXv7p4
No. 6 – Advice for newbies
Finally, Marlon offers some advice for new, and experienced, users. This is good whether you use IPL or lasers for hair removal.
https://youtu.be/tuGKm5kVB4Q
Conclusions
Marlon has ‘exceeded’ my original training significantly whilst achieving an exceptionally high level of success. By ‘pushing’ the boundaries he has found he can obtain good, consistent results with very few problems or complications.
In summary, his settings are (on his IPL device):
Fluence range – 32 to 46 J/cm2
Pulsewidth range – 35 to 40 ms
Pain level – 7 to 8
Test patch fluence – 25 to 36 J/cm2 Cooling is “critical”
Frozen cloths for 3 to 4 minutes after treatment Darker skins – reduce fluence by 1 to 2 J/cm2
Mike’s Blog Posts
24