Page 68 - MetroSelect Single-Line Configuration Guide
P. 68
Special Keyboard Features
Transmit Make Code Only – Not available on
³ 1 1 6 3 1 1 all models.
* Transmit Make/Break Code – Not available on
³ 1 1 6 3 0 1 all models.
* Transmit FOH Break Code – The scanner will
³ 1 1 6 3 1 0 transmit the FOH in the break-code sequence.
Do Not Transmit FOH Break Code
³ 1 1 6 3 0 0
Transmit Cleanup Bit – Use for certain NEC
³ 1 1 6 3 1 5 computers.
* Do Not Transmit Cleanup Bit
³ 1 1 6 3 0 5
Enable Alt-Mode – See Enable ALT-Mode
³ 1 1 6 2 1 7 (Normal) for description.
* Disable Alt-Mode – Caution: If host software
³ 1 1 6 2 0 7 application uses the right Alt key as a “Hot” key,
Alt-mode must be disabled.
† These settings only apply if the Alt-Mode (shown above) is enabled.
†
* Enable Alt-Mode (Normal)
³ 1 1 6 7 0 6 The scanner will duplicate the following keyboard
sequence; Hold down the Alt key and Type the
three digit decimal number that corresponds to
the appropriate character.
Enable Alt-Mode (Advanced)
†
³ 1 1 6 7 1 6 The scanner will duplicate the following keyboard
sequence; Hold down the Alt key and Type the
four digit decimal number that corresponds to the
appropriate character.
11–4