Page 90 - MetroSelect Single-Line Configuration Guide
P. 90
* CodeGate Active Out of Stand
³ 1 1 8 7 1 3
CodeGate Inactive Out of Stand
³ 1 1 8 7 0 3
Laser/Scan Modes
* Normal Scan – The laser turns on after the IR
³ 4 1 8 3 0 4 senses a bar code. The laser remains on for
approximately 3 to 10 seconds.
Blinky Scan – Laser turns on after the IR senses
³ 4 1 8 3 2 4 a bar code. The laser will blink on/off for
approximately 60 seconds.
Continuous Blinky Scan – The laser blinks
³ 4 1 8 3 3 4 continuously and the IR is inactive. This feature
is not available for the VoyagerPDF series.
Custom (One Shot) Scan – The laser turns off
³ 4 1 8 3 4 4 after a good decode.
Enable Manual Activation Mode – The laser
³ 4 1 8 3 5 4 activates when the CodeGate button is pressed.
* Normal Timeout (Button Act)
³ 1 2 0 0 0 0
0.5 Second Timeout (Button Act)
³ 1 2 0 0 1 0
17–2
