Page 97 - MetroSelect Single-Line Configuration Guide

20

MS9535-5M VoyagerBT

Enable Inventory Mode – Bar code data that is
³ 1 2 3 9 1 0 scanned is stored in the scanner’s expanded
memory base. The data will be transmitted when
the scanner is placed back into its BT cradle.

Note: A special beep will sound when a bar code
is scanned but not stored due to a full a
memory base. The scanner must be placed
in the BT cradle to empty the memory.
* Disable Inventory Mode

³ 1 2 3 9 0 0

* Auto Cradle Transmit – All bar code data is
³ 1 2 3 9 0 3 automatically transmitted when the scanner is
placed into the BT cradle.
No Cradle Transmit – The scanner will not
³ 1 2 3 9 1 3 automatically transmit bar code data when placed
in the BT cradle.

* Transmit Inventory FIFO – Data is transmitted
³ 1 2 3 9 0 1 on a first-in, first-out basis.

Transmit Inventory LIFO – Data is transmitted on
³ 1 2 3 9 1 1 a last-in, first-out basis.

Enable Inventory Beep – A beep will sound as
³ 1 2 3 9 1 2 each bar code is transmitted. A special audible
indicator will sound on completion of data transfer.
* Disable Inventory Beep

³ 1 2 3 9 0 2

* No Transmit/Entry Counter
³ 1 2 3 9 0 4

Transmit/Entry Counter – Optional field
³ 1 2 3 9 1 4 transmitted with the bar code data that is a count
of the number of transmissions used to transmit
the entire buffer.

20–1