Page 337 - 2019종합카다로그_Pressure gauge

Ultra high purity pressure gauge (EP grade)
Model: P810 series (316L type)

Spec. sheet no. PD08-01
Service intended
P810 series are specially designed for the ultra-high purity
gas distribution system used in a semiconductor, electronic,
medical, biotechnology, and pharmaceutical industry.

Nominal diameter
35 (1½"), 50 (2") and 63 mm (2½")
Accuracy
Grade A : 50 (2") and 63 mm (2½")
Grade B : 35 (1½"), 50 (2") and 63 mm (2½")
Scale range
-0.1 ~ 0 to 0 ~ 28 MPa
Working pressure
Steady pressure : 75 % of full scale value
Fluctuating pressure : 67 % of full scale value
Working temperature
Ambient : -40 ~ 65 °C
Fluid : Max. 100 °C
Temperature effect
Accuracy at temperature above and below the reference
temperature (20 ℃) will be effected by approximately
±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection Movement
Type 316L SS electropolished Stainless steel
low mount or center back mount
surface finish Ra≤0.25 ɗ Dial
■
¼" NPT male thread
■ ® White aluminium with pointer stop pin
VCR male or female face seal fitting
With black/red lettering, Dual pressure scale (bar/psi)
Element Pointer
Type 316L SS Black painted aluminium alloy
<6 MPa : C-type bourdon tube
≥6 MPa : Helical type bourdon tube Helium leak rate
Tested to confirm leakage rates of less than
10 mbar • Ɏ/sec
-9
Case
Type 304SS, Electropolished with pressure relief
Option
100 mm : P252 dimension
Cover and window Certificates
Twist-lock polycarbonate ATEX Ex II GD c IIC TX

P810_01