Page 73 - Clawbot with Controller
P. 73

Controller: Clawbot Control


                  Now, you’re ready to download the example project and use the Controller to operate the
                  Clawbot, its Arm, and its Claw, all at the same time!

                  The Builder in each group should get the hardware required. The Recorder should get the
                  group’s engineering notebook. The Programmer should open VEXcode IQ Blocks.



                  Hardware/Software Required:


                              Quantity                                Hardware/Other Items

                                  1                                          Clawbot


                                  1                                   Charged Robot Battery


                                  1                                       VEX IQ Radio


                                  1                                         Controller

                                  1                                        Tether Cable


                                  1                                    VEXcode IQ Blocks


                                  1                              USB Cable (if using a computer)


                                  1                                   Engineering Notebook



                  Before you begin the activity...


                  Do you have each of these items ready? The Builder should check each of the following:

                  Before you begin the activity, do you have each of these items ready? The Builder should
                  check each of the following:
                     Are all the motors and sensors plugged into the correct port?

                     Are the smart cables fully inserted into all of the motors and sensors?

                     Is the Brain turned on?
                     Is the battery charged?
   68   69   70   71   72   73   74   75   76   77   78