Page 36 - Cliff Jacobson - Knots for the Outdoors
P. 36
FIGURE 15. DIAMOND HITCH (CONT.)
To apply a diamond hitch to a pack frame, begin by tying a rope end at point A using a clove
hitch (see page 23). Then, loop the line around B and C as illustrated. Next, twist the
horizontal center strands a couple of times and feed the working end of the rope through,
looping it over the frame points in the order illustrated. When the hitch is complete, pull the
rope to tighten the hitch, then tie it off where you started it with two half hitches.
Note: When tying to a pack animal, the hitch usually originates and ends at the ring in the
girth strap, and the “diamond” in the center appears much larger than illustrated.
