Page 162 - Wurth Total Catalogue

HHS DRYLUBE

Dry synthetic wax highly resistant to
centrifugal force containing PTFE.

• Dry synthetic wax.
• No throwing off of the lubricant with fast-
turning and rotating parts.
• Low dirt adhesion.
• Excellent corrosion protection.
• Outstanding creep capacity and gap
penetration behaviour (Fig. 1).
• Lubrication of hard-to-reach places.
• Penetrates between parts with even the
closest tolerances and into spaces.
• Protects against "sag" (see Fig. 2).
• With PTFE solid lubricant share.
• Good emergency running prop erty and
thermal stability.
• Outstanding material compatibility.
Description Contents Art. No. Pack • Protects and maintains O-rings and X-rings.
Qty. • Compatible with plastics.
HHS 400ml • Behaves neutrally toward painted surfaces.
Drylube 0893 106 6 1/6 • Splash and saltwater- resistant, withstands
weak acids and alkaline solutions.
• Contains no silicone, resin or acid.
• Operating temperature range:
–30°C to +100°C
Creep and gap penetration behaviour. Temporarily: +180°C
Thanks to the excellent creep capacity, the active • Colour: Yellowish
Pin Creep ingredient-solvent mixture penetrates between
behaviour
parts with even the closest tolerances, ensuring Applications:
optimum wear protection. In the process, a highly Suitable for lubricating quickly turning elements,
O-Ring
effective, throw-off resistant dry lubricating film e.g. chains and machine parts, wire cables,
Outer link with PTFE is formed. O-rings and X-rings are kept motorcycle chains etc.
in good condition and remain elastic.

Fig. 1

Maintenance information from the professional for the professional.
The chains should be checked and lubricated
at certain intervals. In the process, particular Chain sag Fig. 2
attention must be paid to the proper chain
tension. The sag (see Fig. 2) should be
approximately 15 mm to 20 mm upward and
downward with the wheel under load. Both an
excessively tensioned chain and a chain with sprocket sprocket
excessive sag is harmful.

This product is not subject to the viscosity classification. The product forms a
highly-effective, wax-based dry lubricating film shortly after spraying on,
ensuring optimum corrosion protection.
AUS. pub. 09/10 © This information is only a recommendation based on our experience. Preliminary testing required. Partner Product:

HHS Clean

04 1026