Page 277 - Wurth Total Catalogue

SUPER RTV-SILICONE High grade adhesive and sealing
compound.

Very good resistance to chemicals.
Suitable for use in critical areas, in which the seal
may temporarily be in contact with automotive
fluids (e.g. motor or gear oil, coolants of glycol
mixtures).

Acid-free hardening system.
• Non-corrosive against aluminium, iron and
steel.
• No negative effects on electronic components
or Lambda sensors.

High temperature stability.
Utilisation in the temperature range on machinery
and engines possible.

Colour Temperature Range Application Area According to Specifications Art. No.
Sealant in a compressed air can.
• Easy dosage without auxiliary devices.
• Application of even beads.
Intake system IGM 1052751,
Water pumps Application:
1052917
Black - 60°C to 260°C Oil pumps Ford 6AZ-19562-B 0893 331 1 Optimal adhesion is achieved on clean and dry
Front covers Chrysler 4318025 surfaces. Old sealing materials must be removed
Cam Shaft bearing completely from the sealing surface.
covers
Red - 60°C to 315°C Thermostat bodies 0893 331 2 Technical Data
Blue Oil pans 0893 331 3 Chemical basis modified
Gear box covers Toyota 00295-00102, oxime silicone
Power axle covers 00295-01281, State thixotrope paste
Sun roof 00295-01208 Skin forming time
Engine covers Mitsubishi DM997740, (ASTM-D-4678) 7 minutes
and flanges MD997110 Time to dry surface 10 minutes
- 60°C to 260°C Valve covers Nissan 999MP-A7007 (ASTM-D-4678)
Grey 0893 331 6
Differential gear Honda 08718- Full hardening speed approx. 2 mm/24 h
housing 55000040E, 23°C/50% r.h.)
Intake manifolds HC2963817, Shore hardness A 40
Real axle bodies 0095Z-POA (ASTM-D-676)
Crankshaft housing Hyundai 4C116-21000, Tensile strength approx. 2.2 N/mm 2
21451-33A01 (ASTM-D-412)
Contents: 200ml, Pack Qty. 6/1 Elongation at rupture
(ASTM-D-412) 270 – 300%
Description Art. No. Pack Qty. Thermal conductivity
-1 -1
Replacement Trigger (ASTM D-2214/70) 0.002 Jcm s K -1
Assembly 0891 321 001 1 Coefficient of thermal
-5
expansion (ASTM EB-31) 20 x10 K -1
Dielectric strength
(ASTM D-149) 16 kV/mm
Relative permittivity
@ 1 MHz (ASTM D-150) 2.8
Dielectric loss factor
AUS. pub. 12/16 © @ 1 MHz (ASTM D-150) 0.002 15

Electrical volume
1 x 10 Ω/cm
resistance (ASTM D-257)
05 0501