Page 411 - Wurth Total Catalogue

SEALING WASHERS

Solid Copper Copper asbestos free acc. to DIN 7603
Form A, Form C,
Art. No. 0460 Art. No. 0462 All sealing washers manufactured to the industrial
standard DIN 7603 are flat surface sealing
washers for rigid, flat mating surfaces. They are
used for sealing of rigid pipe connections. The
Solid Copper sealing washer material most suitable for an
Form A = Flat Copper packed seal asbestos free application depends on the fluid handled.
o
o
heat resistant up to max. +300 C Form C = packed seal max. +300 C
Copper, copper-asbestos-free and aluminum
washers can be used for almost every fluid,
Aluminum Vulcanised Fibre except acid, due to their corrosion resistant
Form A, Form A, properties. Special pre-heating make the metal
Art. No. 0463 Art. No. 0465 structure even softer enabling adaption to all
uneven surfaces of the connected parts under
pressure.

Aluminum Vulcanised Fibre Vulcanised fibre is resistant to mineral oil, fats and
Form A Form A weak acids, alcohols, cetone, esters,
heat resistant up to max. +200 C heat resistant up to max. +120 C chlorine, hydrocarbon and have electrical
o
o
insulation properties. They are therefore
especially suitable for pipes carrying water and
water solutions.

SEALING WASHER - ASSORTMENTS

When working with Sealing Washers please note
that the inner and outer diameter are indicated.
In case of an emergency the inner diameter is
most relevant. If, for example, a 10 x 12 washer
is required, a 10 x 14 or even a 10 x 16 washer
may be also suitable.

Description Contents Art. No. Pack Qty. Description Contents Art. No. Pack Qty.
Copper Sealing 18 Sizes Aluminium 18 Sizes
Washers from 6x10 - Washers from 6x10 -
DIN7063/ 32x38mm 0964 460 1 DIN7063/ 30x36mm 0964 463 1
Form A 1140pcs. Form A 525pcs.

Description Contents Art. No. Pack Qty.
Fibre Sealing 18 Sizes
Washers from 5x9 -
DIN7063/ 30x36mm 0964 465 1
Form A 1170pcs.
AUS. pub. 02/17 ©

06 1024