Page 496 - Wurth Total Catalogue

EXTERNAL CIRCLIPS

DIN 471 for shafts.
Standard version.

Material: Spring steel.
Finish: Plain.
Phosphatised and oiled.

Material: Stainless Steel.
Grade: A2/304
Class: 70 A2

d d s b ≈ Plain A2 Pack Qty.
1 3 • For dependable limitation of freedom of
Suit Nominal mm mm mm Art. No. Art. No. movement of rotating machine shafts to a
Shaft Ø mm specified value.
5 4.7 0.6 1.1 0438 5 - • Allows high compressive, tensile and impact
6 5.6 0.7 1.3 0438 6 0489 016 forces to be transmitted without torsion.
7 6.5 0.8 1.4 0438 7 - • Transmission of large axial forces from the
8 7.4 0.8 1.5 0438 8 0489 018 pressure-exerting machine component to the
9 8.4 1.7 0438 9 - groove wall.
10 9.3 1.8 0438 10 0489 011 0 • Shaft circlips can be used where high speeds
11 10.2 1.8 0438 11 - are involved.
12 11.0 1.8 0438 12 0489 011 2 • Suitable pliers allow circlips to be fitted and
13 11.9 1.00 2.0 0438 13 - removed rapidly.
14 12.9 2.1 0438 14 0489 011 4
15 13.8 2.2 0438 15 0489 011 5
16 14.7 2.2 0438 16 0489 011 6
17 15.7 2.3 0438 17 0489 011 7
18 16.5 2.4 0438 18 0489 011 8
19 17.5 2.5 0438 19 -
20 18.5 2.6 0438 20 0489 012 0
21 19.5 2.7 0438 21 -
22 20.5 1.20 2.8 0438 22 0489 012 2
24 22.2 3.0 0438 24 -
25 23.2 3.0 0438 25 0489 012 5
26 24.2 3.1 0438 26 -
27 24.9 3.1 0438 27 -
28 25.9 3.2 0438 28 0489 012 8
29 26.9 3.4 0438 29 -
30 27.9 1.50 3.5 0438 30 0489 013 0
32 29.6 3.6 0438 32 -
35 32.2 3.9 0438 35 0489 013 5
36 33.2 4.0 0438 36 -
37 34.2 4.1 0438 37 -
38 35.2 4.2 0438 38 -
40 36.5 1.75 4.4 0438 40 0489 014 0
45 41.5 4.7 0438 45 -
47 43.5 4.9 0438 47 -
50 45.8 2.0 5.1 0438 50 -

AUS. pub. 04/15 © Partner Product:

Circlip Pliers

06 3101