Page 694 - Wurth Total Catalogue

engine flush and cleaner

Easy to use cleaner for all petrol
and diesel engines with or without a
catalyst.

Newly developed concentrated agent for dirty
engines or old oil.
• New oil remains effective and clean
longer.
• Loosens dirt and sludge deposits inside
the engine.
• Dirt is effectively removed when used oil
is drained. Air-Con

Contains surfactants with a strong detergent
action.
• Cleans and flushes the entire engine oil
circuit.
• Does not attack seals. Exhaust

Uses / Areas of Use:
• If black sludge is suspected.
• If hydraulic tappets chatter.
• If the oil change is overdue. Cooling
• In the event of a loss of compression from
sticking piston rings.
• For all mineral and synthetic based engine
oils.
Description Contents Art. No. Pack Qty.
Engine Flush and Cleaner 400ml 5861 312 400 12 Application: Steering
Before changing the oil, ensure the oil level
is within the normal operating range and the
engine is warm. Add contents and run engine
for 10 minutes, then immediately change oil
and filter.

Dosage: Trans
400ml is sufficient for up to 5 litres of engine
oil. Overdoseage will not cause any damage.
Intake

Fuel

AUS. pub. 01/14 © Oil

08 0501