Page 712 - Wurth Total Catalogue

PETROL SYSTEM CLEANER

For cleaning the intake system of all
carburettor and EFI engines with or
without catalyst.

Cleans the entire intake area, combustion
chambers and valves of all petrol engines.
• Even distribution of cleaner in intake area
by using an aerosol can fitted with a
special spray hose.
• Reduces fuel consumption.
• Improves engine performance, accelerator
response and warm-up phase. Air-Con
Cleans inlet and exhaust valve guides.
• Leads to a more even compression
pressure.
Protects against burnt out valves and ensures
secure valve seating.
• Increases life of the engine. Exhaust
Contains petrol compatible detergents in an
Description Contents Art. No. Pack Qty. active cleaning solution.
System Cleaner* 300ml 5861 112 300 12
Spray Probe – 0891 564 1 Application:
*Order spray probe separately Attach spray probe to can. Cooling
Disconnect an engine vacuum hose at a
CAUTION: NOT to be used on diesel engines. suitable point and insert spray probe. With
the engine warm and running at about 2,000
rpm, spray half of the product into the inlet
manifold whilst simultaneously moving the
probe to and fro to ensure even distribution Steering
Uses / Areas of Use:
• In the event of a loss of compression. to all inlet parts. Allow 30 minutes for the
• If fuel consumption increases. product to take effect. After which, repeat the
procedure with the rest of the product.
• If engine performance decreases.
• In the event of delayed accelerator response.
• Particularly suitable for use before tuning the engine and analysing Dosage:
exhaust gas emissions. 1 can for a 4-cylinder engine; Trans
2 cans for engines with 6 or more cylinders.

Note:
System Cleaner can only be used in
conjunction with Wurth Spray Probe to all
inlet parts. Allow 30 minutes for the product Intake
to take effect. After which, repeat the
procedure with the rest of the product.

Fuel

AUS. pub. 09/14 © Oil

08 0545