Page 45 - WURTHSA CATALOGUE 2018
P. 45
MATERIAL PROCESSING
Steel Processing - DRILLING
Steel
Steel Processing - ABRASIVES
Steel
ZEBRA Emery Cloth SIA Glass Sanding Belts
Production Paper
Light weight cloth sanding strips used for hand sanding For dry sanding of body fillers For sanding and shaping of glass
in many applications. Suitable for fitting work: used to
ensure a perfect fit of steel parts where final adjust-
ment is needed. Used for cleaning , as a means of remov-
ing rust from polished components.
Art. No. 01574 70 36/60/80/120 Art. No. 01673 533 060/080/100/120
Art. No. 00674 830…30mm
(Grits: 36, 60, 80, 120)
(Grits: 60, 80, 120, 180) (Grits: P60/80/100/120)
Art. No. 00674 840...40mm RED PERFECT Velcro Discs
ARIZONA Velcro Discs
(Grits: 60/80/120/180)
For sanding old paint, fillers, plastics, factory primers Used to sand fillers and filler compounds, old paints, HS
Art. No. 00674 850...50mm top-coat paints, water-based paints, factory primers on
(Grits: 60, 80, 120, 400) on new parts and matting of paintwork. new parts, plastic parts and composite fibre materials
(e.g. GFRP).
Pneumatic Orbital Sander
Art. No. 00703 752 1
Grains P40-P120
Initial sanding of factory primers on new parts (KTL Grains P600-P3000
paints), sanding off old paint, sanding out stone-chip Removing dirt and flaws, orange peel effect,
damage and rusty areas, sanding dented areas down trapped dust and paint runs in clear lacquer.
8 Hole Backing Pad for 00703 752 1 to bare metal, pre-sanding of polyester and fine Art. No. 00581 353
filler, levelling of filler edges.
Grains P100-P600 080/100/120/150/200/250
Initial sanding of old paint during transition to new (Grits: 800, 1000, 1200, 1500, 2000, 2500)
paint, matting of top-coat paints, sanding of plain
paints, thermoplastic acrylic paints, clear lacquers, Arizona Velcro Discs
water-based paints, thick-film, primer, synthetic resin Art. No. 05506 353...
and nitro fillers, spray filler, 2-component and MS (Grits: 40, 60, 80, 100, 120, 150, 180, 220, 240, 320,
filling primers, and reaction primers. 400, 500, 600.
Art. No. 00586 600 013 - 150mm
Eccentric Rotary Sander ETS 150-E 21 Hole Backing Pad for 00702 129 0 Waterproof Paper
Art. No. 00702 129 0 Art. No. 00586 652 150 Sanding synthetic resin, nitro and thermoplastic acrylic
lacquer structures.
6 Hole Backing Pad for 00702 129 0
Art. No. 00586 600 01 - Soft Grains: P400-P800
Art. No. 00586 600 11 - Hard Sanding conventional fillers.
Grains: P1000-P2000
Touching up flaws in the cover coat, in case of dust inclu-
sions or dirt particles (P2000).
Art. No. 00584 11...
45
