Page 179 - Derek E. Avery - The new encyclopedia of knots
P. 179
which you bring these outer edges of the larger bight (figure 122.3). Pull
them well through before working the whole knot tight (figure 122.4) by
pulling on both these and on both ends at the same time. The two outer
loops, which can be pulled away from the standing parts in the opposite
direction, will then support separate loads.
figure 122.2
figure 122.3
figure 122.4
Spar hitch: possibly better than either a clove hitch (see page 40) because
it is more secure, or a constrictor knot (see page 49), because it is easier to
undo.
To form a spar hitch, take a turn around the post, passing the end over
the standing part, and then once more around the post in the same
direction. The end is then crossed back over the standing part and tucked
under the rope at the point where it first crosses the post (figure 123).
Splice: used to join together two ropes, whether they are ends of
