Page 218 - DelcoSalesPlayBook2020!

ES-WD-ISCA-101-D-USA

For Commercial Applications

Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––

Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor's P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––

Tag –––––––––––––––––––––––––––––––––––––––––––––––––
ISCA-101-D 5/16"(8)
5/16"(8)
Industry Standard Back-To-Back X"
x"
2"(51)
Horizontal Adjustable Closest 2"(51) 2 3/32"(53)
Vent
Vent
2 3/32"(53)
Carrier
5 7/8"
Specification 5 7/8" Pipe Size 10 5/8"(269) 10 5/8"(269) 15 1/2"(394)Min. 15 1/2"(394) Min. 25 1/2"(648) Max. 25 1/2"(648)Max.
4"(102)
4"(102)
(149)
(149)
Pipe Size
Watts Drainage ISCA-101-D Industry Standard back-to-back
horizontal adjustable water closet carrier with epoxy coated cast
4 1/4"
iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connec- 4 1/4"
(108)
2 3/32"(53)
tions, epoxy coated cast iron patented compression seal face- (108) 2 3/32"(53)
plate assembly, epoxy coated cast iron foot supports with incre-
mental measurements embossed onto legs to easily adjust height x" X"
of carrier to most commonly used fixture requirements. Adjustable
for standard and wheelchair height, adjustable ABS nipple with
integral test cap and neoprene bowl gasket, plated hardware and 5/16"(8)
5/16"(8)
6 5/8"
chrome cap nuts. Carrier complies with requirements of ASME 6 5/8"
(168)
(168)
10 1/4"
2 3/4"(70)
A112.6.1.M up to a 500 lb.(227 kg.) static load. 2 3/4"(70) 10 1/4"
(260)
(260)
Options (Select One or More) 15"(381)
15"(381)
Suffix Description 9"(229)
9"(229)
-3 3" No Hub Fitting
-36 36" Long Barrel Fitting
-CA-100-EXT Aux. Support System
w/Extended Nipple 7 1/2"(191) 7 1/2"(191) 1 3/4"(44)
1 3/4"(44)
-HS Hub & Spigot Connections
0"Min.
-M1 ABS Extended Nipple 0"Min. 5 3/8"(137)
5 3/8"(137)
4"(102) Max.
4"(102) Max.
(Up to 24") 17 3/4"(451)
-M11 Tiling Frame 17 3/4"(451)
4 1/2" 5" 5 1/2"
-M20 Flush Valve Support 4 1/2" 5" 5 1/2" 6" 6"
(114) (127)(140)
(114) (127) (140) (152)
-US Buy American Compliant 4 7/8"(124) Min. 4 7/8"(124) Min. 9 1/2"(242) Max. 9 1/2"(242) Max. (152)
*Note: Extended nipple (-M1) option cannot be
used with -XH carriers.
NOTICE
Siphon jet (4 bolt) arrangement shown. Invert faceplate assem-
bly for blow-out (3 bolt) bowls.
Anchor legs to concrete floor with minimum 1/2"(13) anchor NOTICE
bolts (by others). The information contained herein is not intended to replace the
full product installation and safety information available or the
Dual slotted carrier feet require one 1/2"(13) anchor bolt per foot.
experience of a trained product installer. You are required to
thoroughly read all installation instructions and product safety
x = 5 3/4"(146) Maximum with Standard Nipple
information before beginning the installation of this product.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
USA: T: (800) 338-2581 • F: (978) 975-8350 • Watts.com
Canada: T: (905) 332-4090 • F: (905) 332-7068 • Watts.ca
Latin America: T: (52) 81-1001-8600 • Watts.com
ES-WD-ISCA-101-D-USA 1805 © 2018 Watts