Page 1010 - Foton Workshop Manual - Aumark (BJ1099)

33-4 TIRE AND WHEEL - TIRE & WHEEL ASSEMBLY

ONBOARD CHECKING

1. Check Tread Wear
(a). Measure the remaining depth of the tire
tread. If it is below the service limit, replace
it.
Limit of tire tread remaining depth: 1.6mm
(b). Check the wear mark on the side of the
tire. If it reaches the mark, replace the tire.
NOTICE:
Replace both left and right tires at the same time.

2. Check for abnormal wear in the tire
(a). Check for wear on the tire shoulder. If yes,
ensure the tire pressure is correct. Rotate
the tires after adjusting the pressure.

Air pressure is Tire shoulder wear
insufficient
fuwx33003

(b). Check for damage in the center of the tread.
If yes, check for over-inflation. Rotate the
tires after adjusting the pressure.

Charging toomuch Tread wear
in themiddle
fuwx33004

Page 1010