Page 1169 - Foton Workshop Manual - Aumark (BJ1099)
P. 1169

BRAKE - MASTER BRAKE CYLINDER & VACUUM BOOSTER                        35-21
                 REPLACEMENT



                 1.     Remove the fuel-water separator and the fuse box
                 2.     Drain the brake fluid
                     NOTICE
                 Don't spill the brake fluid on the paint or your skin. If that's the case, clean it immediately.


                                                            3.     Remove the master brake cylinder &
                                                                   vacuum booster
                                                            (a).   Release the harness clamp and remove
                                                                   the brake fluid level sensor connector.
                                                            (b).   Pull out the vacuum alarm sensor connector.


















                                                            (c).   Disconnect the vacuum tube.













                                                                                                                    35











                                                            (d).   Unscrew the pipe connector of the master
                                                                   brake.














                                                 fuwx35002

                                                                                                     Page 1169
   1164   1165   1166   1167   1168   1169   1170   1171   1172   1173   1174