Page 1400 - Foton Workshop Manual - Aumark (BJ1099)

42-36 SUPPLEMENTAL RESTRAINT SYSTEM - RETRACTOR ASSEMBLY

RETRACTOR ASSEMBLY

OVERHAUL

1. Remove the seat belt assembly (Refer to "Chapter 42 Supplemental Restraint
System - Driver/Front Passenger Seat Belt, Replacement")

2. Check the retractor
(a). Slowly tilt the retractor and check the
locking status of the fabric belt.
• The fabric belt shall not be locked when
the tilting angle of retractor is less than
15º in any direction.
• The fabric belt shall be locked when the
tilting angle of the retractor is higher
than 45º. If the checking result fails
the specification, replace with new
driver/front passenger seat fabric belt
retractor assembly. (Refer to "Chapter
42 Supplemental Restraint System-
Retractor Assembly, Overhaul")
(b). Check the locking function of fabric belt.
• The fabric belt shall be locked when
being pulled rapidly.

NOTICE:
Upon detection of any abnormal malfunction during checking, make sure to replace with
new seat belt assembly. Never break up any part on the seat belt retractor assembly. If the
checking result fails the specification, replace with new driver/front passenger seat fabric
belt retractor assembly (Refer to "Chapter 42 Supplemental Restraint System - Retractor
Assembly, Overhaul")

Page 1400