Page 1411 - Foton Workshop Manual - Aumark (BJ1099)

LIGHTING - FRONT COMBINATION LAMP ASSEMBLY 43-7
ADJUSTMENT

1. Adjust the headlamp range
(a). Adjust the vehicle until it meets the following conditions.
• The area around the headlight is not deformed.
• The vehicle is parked on a level surface.
• The tire pressure is within the specified range. (Refer to "Chapter 33 Tire &
Wheel- Tire & Wheel Assembly, On-Vehicle Inspection")
• A driver is in the vehicle (or replaced by a weight of 73Kg), and the vehicle is
ready to move (tank full).
(b). Check the headlamp range.
• Keep the headlamp reflector 10 meters
away from the screen either a curtain or
a flat wall.
• Start the engine.
• Switch on the front combination lamp.
Check whehter the headlamp range is
consistent with the illustration.
NOTICE:
• A and B are the positions of the headlamps; H is
the height of the headlamps; L1 and L2 are the 43
distance between the centers of the headlamps
and the center of the vehicle.
• If not, adjust the headlamp.

(c). Turn the adjustment bolts until the
headlamp is within standard range.

NOTICE:
The headlamp adjustor inside the cockpit can align the headlamps horizontally.

Page 1411