Page 1523 - Foton Workshop Manual - Aumark (BJ1099)

VEHICLE CONTROL SYSTEM - IGNITION SWITCH 47-3

(e). Insert the ignition key, then turn the ignition
switch to the "ACC" position.
(f). Using a stick, press the ignition switch lock
latch.
(g). Pull out the ignition switch.

(h). Use a drill bit to drill a hole in diameter of
less than 0.5mm in the center of the
fastening bolt, unscrew the fastening bolts
with a broken bolt extractor, and remove
the ignition lock.
NOTICE:
The fastening bolts of the ignition lock are of one- 47
time bolt. Make sure to replace with new bolts at
the time of reinstallation.

(i). Remove the ignition switch assembly.

9. Install the ignition switch assembly
(a). After the right to buy new ignition switch
assembly, install the ignition switch
assembly.

Page 1523