Page 1795 - Foton Workshop Manual - Aumark (BJ1099)

CIRCUIT - CIRCUIT REVIEW 61-5

System Description： 11
·Starting system
Ignition switch is in the ST position, the battery current through the engine compartment fuse box
F24 fuse to the ignition switch pin AM2, from the ignition switch Pin ST2 output, through Interior fuse
box F16 fuse, to the start relay R5 s pin 1, through the electromagnetic coil, from starter relay Pin 2' 61
of R5 to ground. The coil is energized, magnetic field is generated, to make the contact point of
relay R5 closed.
Battery current through the engine compartment fuse box FL / 1 fuse, through the starter relay R5
contact, to the start electromagnetic switch, Electromagnetic switch is energized, produces a
magnetic field, the starter contact is closed.
Battery current through the starter contact, to the start motor, the crankshaft flywheel rotates driven
by the start motor through the gear

MaintenanceTips 12
·C33 Ignition switch
AM2- ST2：Ignition switch is in the ST position, conduction.
·R5 Ignition switch
3-5：Ignition switch is in the ST position, the contact is closed.

：Parts location 13

No. Reference harness No. Reference harness

A204 Engine compartment harness C33 Front fender instrument harness

A11 Engine compartment harness C301 Front fender instrument harness

A412 Engine compartment harness C302 Front fender instrument harness

：Connectors among the harness 14

No. No. Reference harnessconnector location( )

A204 C204 Engine compartment harness and front fender instrument harness

E201 C301 Engine harness and front fender instrument harness

E202 A302 Engine harness and front fender instrument harness

：Ground 15

No. Ground position

Left side of the engine compartment ground
A1
(nearby the left front combination lamp)

fuwx61002

＊ Here just shows an example system, and is different from the actual system description.

Page 1795