Page 1899 - Foton Workshop Manual - Aumark (BJ1099)
P. 1899
CIRCUIT - SYSTEM SCHEMATIC DIAGRAM 61-109
System description:
The battery current is output from the fuse F2 in the engine compartment fuse box to the
pin 8 of the tire pressure monitoring controller through the fuse F4 in the internal fuse box,
With the ignition switch at ON/ST, the current is output to the pin 4 of the tire pressure 61
monitoring controller through the fuse F30 in the internal fuse box, to supply the ignition
switch power.
：Parts Location
No. Reference harness No. Reference harness
A40 Engine compartment wiring harness D06 Floor wiring harness
C05 Front wall instrument wiring harness
：Connectors Among The Harness
No. No. Reference harness(Connector location)
Front wall instrument wiring harness and engine compartment wiring harness
A306 C206
(Left side of instrument cross member)
Front wall instrument wiring harness and floor wiring harness (Beneath left A
C302 D202
pillar)
：Ground
No. Ground position
D13 Beneath the driver seat
Page 1899
