Page 1910 - Foton Workshop Manual - Aumark (BJ1099)

61-120 CIRCUIT - SYSTEM SCHEMATIC DIAGRAM

System description:
The battery current is output to the pin B8 of the body control module connector C55
through the fuses F28 and F14 in the engine compartment fuse box to supply electric
power to the rear door electric window.
The battery current is output to the pin B7 of the body control module connector C55
through the fuses F28 and F13 in the engine compartment fuse box to supply electric
power to the front door electric window.
The battery current is output through the fuse F28 and F11 in the engine compartment fuse
box F36 to the body control module connector C56 of pin C10 to supply energy-saving
power.
The battery current is output through the fuse F2 in the engine compartment fuse box to
the body control module connector C55 of pin B6 to supply power to the fog lamp.
The battery current is output through the fuse F2 in the engine compartment fuse box F5 to
the body control module connector C56 of pin C6 to supply power to the turn signal lamp;
The battery current is output through the fuse F2 in the engine compartment fuse box F6 to
the body control module connector C56 of pin C5 to supply power to the position lamp.
Ignition signal
With the ignition switch located at ON/ST, the current is output to the pin E1 of the body
control module connector C58 through the fuse F22 in the internal fuse box, to supply the
ACC power input. With the ignition switch located at ON/ST, the current is output to the pin
E3 of the body control module connector C58 through the fuse F26 in the internal fuse box,
to supply the ignition switch power.

：Parts Location

No. Reference harness No. Reference harness

A40 Engine compartment wiring harness C56 Front wall instrument wiring harness

C05 Engine compartment wiring harness C58 Front wall instrument wiring harness
C54 Front wall instrument wiring harness J04 Left front door wiring harness
C55 Front wall instrument wiring harness J07 Left front door wiring harness

：Connectors Among The Harness

No. No. Reference harness(Connector location)

Front wall instrument wiring harness and engine compartment wiring harness
A301 C201
(Left side of instrument cross member)
Front wall instrument wiring harness and engine compartment wiring harness
A304 C204
(Left side of instrument cross member)

Front wall instrument wiring harness and floor wiring harness (Beneath left A
C302 D202
pillar)
D601 L201 Floor wiring harness and tailgate transition wiring harness (Above left D pillar)

Page 1910