Page 945 - Foton Workshop Manual - Aumark (BJ1099)

TRANSFER CASE - TRANSFER CASE 23-23

(d). Install the electromagnetic clutch coil.
(e). Tighten the fastening nuts of electromagnetic
clutch coil.
Torque:8~11N•m
NOTICE:
After the installation of clutch coil, connect the
wire connector of clutch coil.

(f). Apply the sealant and install the housing.
(g). Tighten the fastening bolts of the transfer
case housing.
Torque:27~40N•m

23

11. Install the front flange
(a). Install the gasket and flange.
(b). Fix the flange with a tool and tighten the
fastening nuts of the flange.
Torque(front):203~241N•m
Torque(rear):305~332N•m
NOTICE:
The front driving shaft flange can be installed in
the same way as the rear driving shaft flange.

Page 945