Page 1524 - Foton Workshop Manual - Sauvana

47-4 VEHICLE CONTROL SYSTEM - IGNITION SWITCH

(b). Install anti-theft bolt of ignition switch
assembly.
NOTICE:
During tightening, tighten two bolts uniformly to
prevent the deflection of pressure plate.

(c). Tighten the fastening bolts of ignition lock
as per the specification and rotate the
fastening bolts of ignition lock, till the
hexagon heads fall off.

(d). Insert the ignition key, then turn the ignition
switch to the "ACC" position.
(e). Install ignition switch latch.
NOTICE:
If hear a "click", the ignition switch is installed
properly.

(f). Install the ignition switch.
WARNING:
Insert and turn the ignition key to align the key
sets.

(g). Install the anti-theft coil/ignition lock cap.

Page 1524