Page 1630 - Foton Workshop Manual - Sauvana

53-10 SEAT - DRIVER'S SEAT/FRONT PASSENGER SEAT

(g). Unscrew two screws.
(h). Disconnect the connector of the electric
buckle wire harness.
(i). Remove the driver's seat assembly.
DANGER:
Since the driver's seat assembly is heavy, be
careful during handling.
WARNING:
• Take care not to scratch the surface of nearby
parts and components.
• Store it carefully and protect the guide from
malposition.

4. Remove the front passenger seat assembly
NOTICE:
• Remove the front passenger seat assembly following the same procedure as the driver's
seat assembly.
• There is no connector of electric buckle wire harness in the front passenger seat.

5. Install the driver's seat assembly
DANGER:
Since the driver's seat assembly is heavy, be careful during handling.
WARNING:
•Take care not to scratch the surface of nearby parts and components.
•Store it carefully and protect the guide from malposition.

(a). Connect the connector of seat belt alarm
switch harness.
(b). Install but do not tighten 2 bolts.
NOTICE:
To ease the installation, install the front fastening
bolts of seat and then tighten all bolts.

Page 1630