Page 2530 - Foton Workshop Manual - Sauvana

62-478 DIAGNOSIS-POWER SUNROOF

3. Examine ground connection of the sunroof assembly.

(a). Disconnect connector F07 with sunroof
assembly .
OFF
Ω (b). Examine resistance between connector
F07 of sunroof assembly Pin 4 and ground
connection with a multimeter.
F07
Standard resistance:(Check for open
6 5 4 3 2 1
circuit)

fuwx62972
Multimeter Standard value
connection pin
F07 (4) - Grounding ＜ 2 Ω

Check if the result is normal?
YES> To step 4.
NO> Repair the open circuit between connector F07 Pin 4 and the ground connection.

4. Check harness and connector(Sunroof assembly – sunroof switch)

(a). Ignition switch:"LOCK".
(b). Disconnect connector F07 with sunroof assembly .

(c). Ignition switch:"ON".
ON
(d). Examine voltage between No. 1 and Pin
T.S
6 of connector F07 of sunroof assembly
F07
and the ground connection.
Standard Voltage:(Check for open circuit)
6 5 4 3 2 1
v
Multimeter
Conditions connection Standard
pin
fuwx62973 value
Sunroof switch F07 (1) - BATTERY
open status Grounding VOLT
Sunroof switch F07 (6) - BATTERY
close status Grounding VOLT

Check if the result is normal?
YES> Replace sunroof assembly.
NO> To step 5.

Page 2530