Page 117 - Foton Workshop Manual - Tunland (AT)

SERVICE SPECIFICATIONS - AXLE & TRANSMISSION SHAFT 03-33

AXLE & TRANSMISSION SHAFT

SERVICE DATA

Front Axle Assembly
03
Driving/Driven Gear Type Standard Hypoid

Speed Ratio (Qty of Teeth) Standard 3.889（35/9）

Driving/Driven Gear Gap
Standard 0.11～0.16
(mm)
Driven Gear Swing (mm) Max. 0.05
Differential Gear Type Standard Straight Bevel

Differential Gear Speed Ratio
(Qty of Half Axle Teech/Qty Standard 14/10
of Planetary Teeth)
Standard 0～0.076
Differential Gear Gap (mm)
Limit 0.2

Driving Gear Front Bearing
Standard 79.4*36.5*29.4
(Ext. Dia. * Int. Dia. * Width)
Driving Gear Rear Bearing
Standard 68.3*30.2*22.2
(Ext. Dia. * Int. Dia. * Width)
Differential Gear Bearing (Ext.
Standard 80*45.2*19.8
Dia. * Int. Dia. * Width)

Inner Axle Bearing (Ext. Dia.
Standard 62*35*14
* Int. Dia. * Width)
Standard >80N
Electric Clutch Radial Force
Limit 120N(max)
Ventilation Tube Size (Ext.
Dia. * Wall Thickness * Standard Φ7*2*180
Length)

Driving Pionion Torque (N•m) Standard 0.97～1.32
Driving gear flange assembly
0.05mm
end runout

Model Hyboid gear oil
Main Reducer Gear Oil
Usage 1.2L

Rear Axle Assembly

Driving/Driven Gear Type Standard Hypoid
Driving/Driven Gear
Standard 0.127～0.203 mm
Clearance

Page 117