Page 1428 - Foton Workshop Manual - Tunland (AT)

ENGINE MECHANICAL - ROCK ARM CHAMBER, ROCK ARM , ROCK ARM CUSHION BLOCK, ROCK ARM
15-54 BRACKET & CAMSHAFT

44 . Tighten the fixing bolt of overhead
camshaft sprocket housing and flywheel
housing.
Torque: 12 Nm

15

45 . Install the camshaft drive chain tensioner. (Refer to "Chapter 15 Engine
Mechanical - Timing Device, camshaft drive chain tensioner overhaul")

46 . Tighten the fixing bolt of the overhead
camshaft sprocket housing assembly.
Torque: 7.5 Nm

NOTICE

• The sealing washer of the overhead
camshaft sprocket housing cove must be
replaced.

47 . Tighten the fixing bolts of harness bracket.

Torque:7.5 Nm
48 . Mount the fixing buckle of the EGR
actuator connector and its harness.
49 . Mount the fixing buckle of the engine
harness and bracket.

Page 1428