Page 1435 - Foton Workshop Manual - Tunland (AT)

ENGINE MECHANICAL - CYLINDER HEAD,VALVE 15-61

(a) Tighten the retaining bolts of the cylinder head
in numeric sequence.
Torque: 60 N•m

(b) Draw straight lines with paint, as marks on
the bolt heads and the cylinder head.
(c) Tighten the cylinder head bolts to 90° in the
sequence of tightening.
(d) Tighten the bolts to another 90° in the same 15
sequence and ensure the mark on the bolt
head is aligned to that on the cylinder head.

19 . Install the camshaft. (Refer to "Chapter 15 Engine Mechanical - Rock Arm
Chamber Cover, Rock Arm, Rock Arm Cushion Block, Rock Arm Bracket &
Camshaft, Camshaft overhaul ")
20 . Install the rock arm, rock arm cushion block and rock arm bracket. (Refer to
"Chapter 15 Engine Mechanical - Rock Arm Chamber Cover, Rock Arm, Rock
Arm Cushion Block, Rock Arm Bracket & Camshaft, Camshaft overhaul ")

21 . Tighten the fixing bolts of the engine rear
suspension lug and the engine cylinder
head.
Torque: 33 N•m

22 . Tighten the fixing bolts of the engine front
suspension lug and the engine cylinder
head.
Torque: 33 N•m

23 . Install the rock arm chamber cover. (Refer to "Chapter 15 Engine Mechanical -
Rock Arm Chamber Cover, Rock Arm, Rock Arm Cushion Block, Rock Arm
Bracket & Camshaft, rock arm chamber cover overhaul ")
24 . Install the thermostat housing assembly. (Refer to "Chapter 17 Cooling -
thermostat housing , replacement")
25 . Install the engine exhaust air manifold. (Refer to "Chapter 14 Intake Air - Exhaust
air manifold. replacement")

Page 1435