Page 207 - Foton Workshop Manual - Tunland (AT)
P. 207
DIAGNOSTICS - ANTI-LOCK BRAKING SYSTEM (ABS) 04-61
(d) Connect the battery negative cable.
(e) Ignition switch: ON.
(f) Use a multimeter to measure the voltage
between the pin 2 of steering sensor
connector C059 and the ground.
04
Standard voltage
4 3 2 1 C059 Connection of Standard value
the multimeter
C059(2)-ground Battery voltage
ftwxd041458
Is the inspection result normal?
YES>To step 4.
NO> Repair or replace harness or connector.
4 . Check steering sensor harness
(a) Ignition switch: OFF.
(b) Disconnect the battery negative cable.
(c) Disconnect connector A006 of ABS/ESP.
(d) Disconnect steering sensor connector C059.
(e) Use a multimeter to measure the resistance
between the pin 1 of steering sensor
connector C059 and the ground.
Connection of
4 3 2 1 C059 the multimeter Standard value
C059(1)-ground <2Ω
ftwxd041459
Page 207