Page 221 - Foton Workshop Manual - Tunland (AT)
P. 221

DIAGNOSTICS - ANTI-LOCK BRAKING SYSTEM (ABS)                       04-75


                 (d)    Confirm whether there is a fault code related to ABS/ESP?

                 Is the inspection result normal?
                 YES>To step 2.

                 NO>Intermittent trouble exists.
                                                                                                                     04
                 2 .    Check ABS/ESP harness
                 (a)    Ignition switch: OFF.
                 (b)    Disconnect the battery negative cable.
                 (c)    Disconnect connector A006 of ABS/ESP.
                 (d)    Disconnect ESP OFF switch connector D016.

                                                           (e)    Use a multimeter to measure the resistance
                                                                  between the pin 12 of ABS/ESP connector
                                                                  A006 and the pin 1 of ESP OFF switch
                                                                  connector D016.
                      D016                A006
                                                                  Standard resistance(Check whether there
                     3  2   1
                                 13  12  11  10  9  8  7  6  5  4  3  2  1
                                    24  23  22  21  20 19  18  17 16  15  14
                    6   5   4    38  37  36  35  34  33  32  31  30  29  28  27  26  25  is open circuit)
                                                                 Connection of
                        1                      12                                          Standard value
                                                                 the multimeter

                                                            A006(12)-D016(1)                     <2Ω



                                                 ftwxd041470

                                                           (f)    Use a multimeter to measure the resistance
                                                                  between the pin 2 of ESP OFF switch
                                                                  connector D016 and the ground.


                                                                 Connection of
                                                                                           Standard value
                                                                 the multimeter


                                                               D016(2)-ground                    <2Ω
                        3    2    1
                                        D016
                        6    5    4



                                                 ftwxd041471

                 Is the inspection result normal?

                 YES>To step 3.
                 NO> Repair or replace harness or connector.

                 3 .    Replace ESP OFF switch
                 (a)    Replace ESP OFF switch.





                                                                                                         Page 221
   216   217   218   219   220   221   222   223   224   225   226