Page 660 - Foton Workshop Manual - Tunland (AT)

04-514 DIAGNOSTICS - SRS SYSTEM

Diagnostic steps

1 . Check harness (SRS control module-lock spring)

(a) Turn off the ignition switch, and disconnect the negative pole of the battery for more
than 90 seconds.

04 (b) Dismantle horn button assembly and
disconnect the driver's SRS assembly
connector.

(c) Disconnect SRS control module connector
C016.
(d) Disconnect the connector of clock spring
C010.
(e) Connect the negative pole of the battery and
turn on ignition switch to “ON”.

(f) Disconnect the connector of clock spring
C010.
Standard voltage

Multimeter connection Standard value

C010 (1) ground
0V
C010 (2) ground

Check whether the result is normal?
Yes> go to step 2

Page 660