Page 2409 - Foton Workshop Manual - Sauvana
P. 2409

DIAGNOSIS-LIGHTING SYSTEM                               62-357

                 Diagnosis Procedure
                 Symptom description:
                 Turn combination switch to "Left steering" gear or "Right steering" gear, only one side of
                 steering lamp doesn't turn on, the other side is normal.
                 △ PROMPT:
                 Take LF steering lamp as the example, use the same method to check other steering                  62
                 lamps.


                 1.     Check steering lamp bulb


                 (a).   Check if the LR and RR combination lamp steering lamp connectors are loose and
                        falling off.
                 (b).   Remove the bulb of left and right steering lamp.


                                                            (c).   Connect the positive and negative
                                                                   electrode  of  bulb  into  the  positive
                                                                   and negative electrode of the battery,
                                                                   respectively,to check if the bulb will light
                                                                   up.








                 Is the result normal?
                 Yes>To step 2.
                 No >Replace the bulb.


                 2.     Check The Harness Disconnection


                 (a).   Disconnect body controller C56 and LF combination lamp A28 connector.


                                                            (b).   Use a multimeter to measure the resistance
                                                                   between No. 9 terminal of connector A28
                                                                   and No. C4 terminal of connector C56.
                                                                   Standard resistance: (check whether there
                                                                   is an open circuit)

                                                                     Connect the pin by      Standard value
                                                                         multimeter
                                                                       A28(9) - C56(C4)            ≤2Ω












                                                                                                     Page 2409
   2404   2405   2406   2407   2408   2409   2410   2411   2412   2413   2414